How to Hook Up a Xbox 360 to a PC Monitor

Share on Facebook So you’re looking to add an audio component to your presentations. Epson projectors do not have audio pass-throughs, meaning there is no way to connect audio directly to the projector to play sound. However, it is possible to connect a stereo directly to the same computer or component to which you’ve hooked up the projector. Then, your audio will sync up with your on-screen presentation without a problem. Add an audio component to your presentations. Connect Audio Step Determine what type of audio output you will be working with. If you’re using a computer, you will likely need to plug into your headphone port, which is a small, round port called a 3. These are two round ports, one red, one white, and likely on the back. If this is the case, skip to Step 3.

Television-component hookup

RCA cables are fitted with color-coded plastic plugs that are inserted into matching color-coded jacks on the back of your television or another component. Do not confuse them. Unless the RCA to coaxial modulator works in reverse then you will have to either follow the following technique or search for the coax to RCA modulator.

You will not be able to mistakenly insert the wrong end of the cable as the component is designed to only take the proper end of the cable. Match up the corresponding color cable and insert the appropriate plug into the input port. If you have a TV or video option, you must select the TV option.

Computer Cable Store™ RF modulator allows you to connect RCA audio/video components to a television with only an F-type connector. With our RF Modulator Now you can provide accommodations for DVDs, satellite receivers, game consoles, VCRs, VCDs, laser discs, camcorders, CDs, MDs, and any other av equipment on your older TV.

OK, thanks for the responses: Originally Posted by hometheaterguy You need a cable box. You connect coaxial cable between the wallplate and the box. Then you can connect a component video red, green and blue cable to a component-to-VGA adapter, or use a S-video, or the yellow RCA composite port. Make sure in your projector menu all sources are enabled and you set it to auto source. The projector has a VGA-to-component adapter, so I guess this is a solution, but aren’t cable boxes subscription-based?

We have our cable connection as a subscription through our school, and they don’t offer cable boxes specifically for this I’m surprised you got anything at all probably RF leaking in. There are no cheap adaptors that convert component to VGA, a transcoder is required. Targus, our projector has an adapter that connects to the VGA, no transcoding required Also, about hooking it up to the sat receiver:

Hooking up the idatalink maestro RR

These mistakes can range from simple problematic issues to things that could quickly lead to premature device failure. Let me quickly explain why. Every cable has inherent resistance.

Component video is on green, blue and red connectors; the green connector can be used for Composite video. After you make the connection with our S-Video to Composite Video cable you can use your remote to select “AV input” to get the S-Video signal on your TV. This cable has a male 4-pin S-Video on one end and a male RCA plug on the other end.

Though many improvements have been made after that, the RCA connectors are still compatible. The main advantage of the RCA connectors is the ease of plug and play they provide. The male connectors are sturdy and consist of a central plug surrounded by a segmented ring for flexibility. Often the female jack is in the device to be connected and comprises a ring with a slightly smaller diameter that permits a snug fit for the plug. The RCA connector is often used to transmit composite video signals.

There are a variety of RCA to RCA adapters that one can use to connect different electronic equipment depending on the specific needs. These plugs can be used to insert speaker wires that come from amplifiers and receivers to the speaker without having to worry about shorting or missing some wires. The plugs are color codes to ensure easy identification of the wires.

Sign Up & Save 10%

The second is that the sound bar is the place where all connected devices should be fed both audio and video. Depending upon which route you choose, the set up and configuration of your sound bar speaker will vary greatly. Doing this means that you would connect your Blu-ray player, streaming media device Roku, AppleTV, Chromecast, etc directly to the television.

Connections that include an AV receiver can often be complex, so check your AV receiver’s instruction manual for additional details. See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need.

Composite video cable for the Xbox In the most normal use, cables have a standard plug on each end, consisting of a central male connector , surrounded by a ring. The ring is often segmented to provide spring gripping pressure when mated. Devices mount the socket female jack , consisting of a central hole with a ring of metal around it. The ring is slightly larger in diameter and longer than the ring on the plug, allowing the plug’s ring to fit tightly over it. The jack has a small area between the outer and inner rings which is filled with an insulator, typically plastic very early versions, or those made for use as RF connectors , used ceramic.

connect rca to component

Luckily, it’s not too difficult to plug everything in and get your game on. Consoles like the PlayStation 2 and the original Xbox all connect over component, and while composite is an option, you’ll get better video quality by going with component if it’s available on your TV. Older consoles won’t necessarily support component, and in those cases — especially with older think the Dreamcast, the Nintendo 64 or the GameCube, composite is your best option.

With even older consoles, S-Video may be your best choice. Use the highest-quality video connector on offer that’s also available on your TV.

Jan 18,  · You need a cable box. You connect coaxial cable between the wallplate and the box. Then you can connect a component video (red, green and blue) cable to a component-to-VGA adapter, or use a S-video, or the yellow RCA composite port.

Please scroll down to read the specifications. This converter accepts a i Composite or S-Video signal and converts it to i or Component Video signal. Component Video carries the video signal on three separate channels, one for the brightness and sync information ususally color-coded green and the other two carry the color information usually color coded blue and red.

Televisions that have component video usually have three female RCA receptacles coded green, blue and red – do not confuse them with the yellow for composite video , and the red and white for stereo audio. This converter allows for an interlaced video signal to be converted to Component Video. This Professional converter does such a good job that the resulting component video signal is usually better than the component video output of consumer products, such as DVD players.

There’s no switches or settings to configure, you just connect the the unit to the a composite video source or an s-video source or both at the same time and to the component video display. You can input both composite video and s-video at the same time and the unit will detect the first active video signal, thus acting as an auto-switch between two sources, such as a DVD player and an X-Box. If your source is a 7-pin S-Video Connector, then add our 7-pin to 4-Pin cable.

This product does not change the aspect ratio. If the aspect ratio is 4: If it is

How to Hook Up a Xbox 360 to a PC Monitor

Generally there are only two such suitable inputs: A line-in computer input blue that is separate from the computer’s microphone input usually pink Failing that, a line-in input on a USB or Firewire interface. Connecting to line-in of the computer In general, you need to run an appropriate cable from an output on the external device for example a tape deck, or a phono amplifier or receiver connected to a turntable to the line-in port of the computer. Do not connect to the mic-in port of the computer.

A standalone turntable should not generally be connected directly to the computer unless you are making specialist recordings from pre s discs.

The Vivid AV® HDMI to Component Video Converter will allow you to enjoy the same high quality HD content you get via HDMI but now with the hassle free connections of Component Video. The HDMI In supports bandwidth up Mhz/ Gbps per channel for a total of Gbps.

December 27, By Matt The Roku 3 is a really interesting device. It connects to your TV and the Internet and allows you to watch streaming digital videos on your television. It is the top of the line Roku model, and is one of the best options available among the set-top-box category of products. Before going any further, the ideal solution to this problem if you already have the Roku 3 in your possession, is to return the Roku 3 and exchange it for one of the models that is compatible with your TV.

The Roku 1 was part of the newest wave of Roku products, and it includes the yellow, red and white RCA outputs that will allow it to connect to most older televisions. Obviously a TV is a big purchase and might not make sense simply to get a device to work, but TV prices have been coming down a lot lately, and a flat screen TV might be more affordable than you think.

But if either of those options is not one that you want to pursue, then there is one specific device that will allow you to convert from an HDMI signal to component or RCA. This device is called the HD Fury 2 , and you can buy it from a few select retailers, or directly from the company that manufactures it. Some people have had success getting this Etekcity converter to work with the Roku 3, while others claim that they have problems with HDCP compliance as well.

How to convert a RCA Composite cable into a RG6 Coaxial cable?

Get Ready Introduction This guide contains instructions for installing and connecting components of the inch built-in Custom Home Theatre system. These step-by-step procedures are presented in sequence and should be followed carefully. Use the small boxes next to the instructions to check off completed tasks. We recommend that two people are available to install this system.

Dec 12,  · For another 7 bucks – $11 – you can just get a powered MHL/HDMI adapter cable, with a separate 5 to pin adapter included, and have the advantage of full resolution HD from your Samsung S4 instead of component SD video with that other cable (if not bogus).

I own some of these as a back-up though I’ve never used them. The other question is GC has some if you need them right away. If you do use RCA to XLR cables, make sure to keep them as short as you can and realize you will have to up the volume on either the speakers or your master output to make up for the lower signal. RCA cables tend to stay under 21 feet due to signal loss. Also, be sure they are wired correctly internally.

1ft VGA to Component Video Cable, HD15 / 3 RCA Female

Share on Facebook While primarily used to transmit high quality video from a video device like a DVD player to a television, component video cables are technologically no different that standard red, white and yellow RCA composite cables, which carry stereo audio and lower quality video. This means that if you are in need of RCA composite cables, but happen to have some component video cables laying around, you can actually use them to connect your devices and transmit audio and video to your television.

You can use component video cables instead of the standard composite cables pictured here. Step Connect your component video cable to the RCA inputs on your video device.

For video, this means that you should use component cables (also called YPbPr cables) if possible, S-video if component is not available, and an RCA cable if neither component nor S-video is an option.

It is extremely important that you make sure everything is connected to the right place in order for your system to function properly. HDMI and Component Video connections are able to deliver p, i or p high definition signals. Digital Coax or Fiber Optic connections are both considered to be digital connections. Your receiver might be able to create surround sound and other audio formats through HDMI. It may be necessary to connect using Component Video and Digital Audio outputs, depending on how your system is configured.

Monster PowerCenters provide a central AC power center for clean power and surge protection for all of your home theater components.

How to Connect Xbox One S to Component RGB (YPbPr) TV


Hi! Do you need to find a sex partner? It is easy! Click here, free registration!